JK Brawler FULL Width Front Bumper Brawler Bar Tabs Poison Spyder
JK Brawler FULL Width Front Bumper Brawler Bar Tabs for Jeep Wrangler JK 2007-2016. The Brawler FULL Width Front Bumper for JK provides the highest ground and tire clearance possible in a full width JK bumper. This bumper brings Poison Spyder form and function to the overlander market, and to those who would like to keep their stock JK fender flares.
The bumper extends to the full width of the stock flares, to integrate with them cleanly while protecting them from trail hazards. This configuration includes recessed fog light buckets and high clearance recovery shackle tabs. Like all bumpers in the Brawler product line, the FULL Width is fabricated from 3/16" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. This product ships as bare steelit will need to be painted or powder coated prior to final installation. We do not yet offer a powder coat option for this item.
- Full-width, multi-faceted design protects lower grille and extends to outer edge of stock flares
- CNC laser cut from 3/16 plate steel, precision brake-formed for a perfect fit
- Recessed light buckets accept OE fog lamps or Rigid Industries Dually's by use of adapter plate (sold separately)
- Brawler Bar made of 1.5 X .120 wall DOM tubing with 1.25 OD X .120 wall DOM tube gussets
- High clearance recovery shackle tabs
- CNC machined from 1 thick plate steel
Finally there is a Full Width front bumper that incorporates Poison Spyder's attention to form and function, in an elegant package that integrates perfectly with the stock Jeep or aftermarket stock replacement fender flares. While this bumper was designed for those Jeep enthusiasts who prefer a more "overland" style and function to their Jeep build, or want to keep their factory flares, we couldn't simply make a full-width monstrosity like so many unsightly bumpers already on the market. Even though it's full width, and less likely to be used on the hard core rock trails, we still felt compelled to design it with maximum approach angle, ground clearance and tire clearance possible while still extending out to the full width of the stock flares to protect the corners of the Jeep.
The lower skid plate is sold separately, so that those who would rather run without it (and gain even more ground clearance) may do so. The outriggers that extend to the edge of the flare are kept as tight to the original Brawler's high clearance lines as possible, tapering outward toward the ends. This allows the tires the best access to grab obstacles to pull the Jeep up and over rather than impeding progress when metal meets rock. The outriggers are designed to integrate visually with the stock fender flares, in a clean, almost "factory" look. The back side of the outrigger is scalloped to provide maximum clearance for up to a 37" tire with minimal suspension lift.
Plate Steel Construction
Every Brawler bumper starts out as a sheet of 3/16" plate steel. Our CNC laser cutter precisely cuts the flat pattern as designed in our 3D CAD system. Next the bumper parts are CNC brake-formed into the high clearance, multi-faceted pieces that will become a finished bumper. Highly skilled tradesmen weld each bumper together using precision-engineered assembly fixtures for a perfect fit. Finally the complete bumper is sent through our finishing department for final appearance surfacing and quality control checks.
The Brawler Bar is modeled after the bar found on our original RockBrawler front bumper. It is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-notched, NC-bent 1-3/4" diameter .120" wall DOM tubing. The complex laser-cut notch allows the Brawler Bar to be welded to two different planes on the surface of the bumper, providing incredible strength.
The Brawler Bar is further strengthened by a pair of 1-1/4" DOM tubular gussets. Note: Warn PowerPlant winches are not a direct fit with the DOM Tube gussets (they may be installed with some minor modifications by the installer).
Poison Spyder Brawler series front bumpers can be mounted without cutting or altering the Jeep's frame rails. The faceted design of the Brawler FULL Width Front Bumper provides the best ground clearance and approach angle possible in a full width bumper that doesn't require frame modifications. The factory "Crash Bar" may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Lite Skid Plate (p/n 17-59-030, sold separately), which conceals the crash bar and protects the electronic sway bar disconnect.
Recessed Fog Lamp Mounts
Every Brawler Front Bumper comes with provisions for re-mounting your factory fog lamps. These consist of recessed fog lamp "buckets" that are made of CNC laser cut DUM tubing with a mounting flange designed to accept the mounting hardware of the stock lamps. The recess and all-steel buckets help protect the lamps from the rocks. For those who do not have the stock fog lamps, or would like to upgrade to more powerful LED lamps, Poison Spyder offers a unique LED Fog Lamp Mounting Kit (p/n RIG-DLYFOGMNT) for installing a pair of Rigid Industries "Dually" LED lamps in the fog lamp locations.
IMPORTANT: The stock fog lamps used on the Jeep Wrangler 10th Anniversary Rubicon do NOT fit into the fog lamp buckets on this bumper. If installing this bumper on a 10th Anniversary Rubicon, we suggest using a pair of Rigid Industries Dually or Dually D2 LED lamps along with our JK Dually Fog Lamp Mounts instead of the stock fog lamps.
The Brawler FULL Width Front Bumper is designed to accept most Warn winches, and winches from other manufacturers that conform to Warn's standardized winch mounting dimensions. The winch sits in a slight depression on the top surface of the bumper, with plenty of CNC laser cut plate steel gusseting inside the bumper shell, directly underneath the winch to provide maximum strength. The Winch Fairlead Mount (p/n 45-57-010) is sold separately, so that those who wish to not run a winch are left with a clean looking, unobstructed top surface on their bumper. IMPORTANT: installing the Warn ZEON winch on the Brawler MID Front Bumper requires a set of our ZEON Winch Spacer Plates (p/n 45-57-010-03).
Recovery Shackle Tabs
Recovery Shackle Tabs are standard equipment on the Brawler FULL Width Front Bumper. These 3D CAD designed tabs are modeled after the high clearance tabs designed for our hard core BFH series bumpers, providing maximum approach angle while minimizing hang-ups on rock obstacles. They are CNC machined from 1" thick steel billet, specifically designed to accept our heavy duty 3/4" Recovery Shackles.
Optional Brawler Lite Skid
The optional Brawler Lite Skid Plate (p/n 17-59-030) attaches to the bottom of the Brawler FULL Width Front Bumper to conceal and protect the stock "crash bar", plus it has an extension to protect the electronic swaybar disconnect motor found on Rubicon JK's.
The skid is made of CNC laser-cut 3/16" plate steel, precision brake-formed for a precise fit to the Brawler FULL Width Front Bumper (yes, the Brawler Lite and Brawler FULL Width share the same skid plate).
A separate version of the Brawler FULL Width Front Bumper is available with the DOM tubular "Brawler Bar".
The Brawler FULL Width Front Bumper comes to you as bare steel, ready to accept paint or powder coat in the color of your choice. A powder coat option for this item is not currently available directly through Poison Spyder. See your nearest Poison Spyder dealer for powder coating options through a coating shop near you.
Customers also viewed